2. Unplug the treadmill from the power outlet.
Shock and electrocution hazard.
• Unplug unit and let sit 10 minutes before cleaning or performing
maintenance.
• Electrical charge can remain in unit after unplugging.
• Keep water and liquids away from electrical parts.
Remove end caps
1. Remove two screws securing right end cap using a Phillips screwdriver.
Qty.DescriptionItem
2Screws1
1Right end cap2
2. Repeat step for left end cap.
Remove top steps
1. Remove the right top step by inserting a long 3/8” drive socket extension into the right top step and
prying backwards.
Qty.DescriptionItem
1
3/8” Drive Socket Exten-
sion
1
1Right Top Step2
2. Remove right top step.
3. Repeat steps 1 and 2 for left top step.
Page 113 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
