CYBEX 625T - Page 121

Remove running deck
1. Remove the eight screws and eight flat washers that hold the deck in place using a 7/16” Socket
wrench.
Qty.DescriptionItem
87/16” Bolts1
8Flat washer2
1Running deck3
1Running belt4
2. Slide the running deck out of the frame.
Inspect deck bumpers
Inspect the deck bumpers for cracks or wear.
Replace the deck bumpers if the rubber is cracked or worn using a 1/4" Allen
wrench.
Qty.DescriptionItem
2Deck Bumper1
2Mounting Bolt2
2Washer3
Page 121 of 209
Cybex 625T Treadmill Part Number