2. Install the two bolts securing the deck pivot shaft to the frame using a 1/2” Socket wrench.
Make sure the deck pivot brackets are installed correctly.
3. Install the two bolts, split washers and flat washers securing the front of the deck pivot bracket using
a 5/32” Allen wrench.
Install running deck
1. Place the deck in the correct position on the frame.
Qty.DescriptionItem
87/16” Bolts1
8Flat washer2
1Running deck3
1Running belt4
2. Install and tighten the eight screws and eight flat washers that hold the deck in place using a 7/16”
Socket wrench.
Install front roller
1. Slide the front roller into the running belt.
2. Slide the drive belt around the front roller before attaching the front roller.
Qty.DescriptionItem
1Front roller1
1Drive belt2
1Mounting bolt3
1Tensioning slot4
Page 132 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
