CYBEX 625T - Page 197

2. Install the four screws securing the MCC board to the console using a Phillips screwdriver.
Qty.DescriptionItem
1MCC Board1
4Screw2
1Console3
3. Plug the following cables into the MCC board; display (J16), console (J15), CSAFE (J18) and radio
(J14).
Qty.DescriptionItem
1Display (J16)1
1Console (J15)2
1Wing Nut3
1Ground Connector4
1CSAFE (J18)5
1Audio, gray (J14) Optional6
Page 197 of 209
Cybex 625T Treadmill Part Number