CYBEX 625T Service Manual

4.
Press the ENTER key once to enter setup values. Press again to save any changes and
advance forward in the menu.
Navigation while in Statistics or Diagnostic menus:
Scroll up and down in menu. Adjust data values.Up/Down keys
Enter and exit menu items, move forward in menu if not required.Enter
Exit back to Dormant Mode.Stop
Select Diagnostics.Quick Start
Statistics menu:
Total distance in Miles or Kilometers.Miles
Total hours of running belt movement.Hours
Total starts of running belt movement.Starts
Displays Svc in and number of miles or kilometers to go before next running
belt/deck service is needed.
Service odometer starts at 15,000 miles (24,140 km) and counts down to zero.
Once it reaches zero the console will display SVC.
See SVC - Belt and Deck service odometer for service procedure.
Service Odometer
Displays number of errors, up to 20. If no errors are stored [ 0 ] [Err ] [Log] will
be displayed.
To scroll through error log press Enter, then use Up/Down keys.
When viewing error log use the Enter key to toggle display to Time Stored,
Date stored, then back to error number.
Reset - While viewing error log press the Scan/Hold or Display option
key twice.
Error Log
5. Press the Quick Start key to exit error log and enter Diagnostics menu.
Page 56 of 209
Cybex 625T Treadmill Part Number

CYBEX 625T Specifications

General

User Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0% to 15%
Display	LED
Heart Rate Monitoring	Contact and wireless
Running Area	60" x 20" (152 x 51 cm)