Error 14: Drive Error Unknown
Cause:
The drive provided an error in a packet that was corrupt, or encountered an otherwise unrecognizable
error to the console. This is a ‘catch all’ for any errors that are not known or recognized.
Service:
• Check the console cable for tears or shorts, and verify all connections are clicked-in and solid.
• Check for terminal corrosion.
• Ensure all grounds are in place and connected to un-painted and un-corroded surfaces.
• Check drive and display communications with the Cybex test protocol software on a laptop.
• Reprogram or replace the drive and replace the console cable.
• Consider moving the equipment to a different location as it can be receiving interference from
something nearby.
Page 80 of 209
Cybex 625T Treadmill Part Number
To Next Page
Loading...
Need help?
General
