CYBEX 625T Service Manual

Error 93: Over Voltage (DC Link)
Cause:
Drive’s internal boost circuit is reporting >400V DC on the bus.
Service:
• Verify line voltage isn’t spiking.
• Check the treadmill’s internal AC wiring.
• Verify correct voltage controller is used with regard to power at the outlet.
• Replace the Drive controller if the error continues.
Page 89 of 209
Cybex 625T Treadmill Part Number

CYBEX 625T Specifications

General

User Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0% to 15%
Display	LED
Heart Rate Monitoring	Contact and wireless
Running Area	60" x 20" (152 x 51 cm)