CYBEX 625T Service Manual

Error 142: Out of incline range (over 15% or lower than -3%)
Cause:
The Drive Controller encountered the zero switch when outside of expected limits. The display will shut
down power to the elevation motor, and show dashes for incline until the drive has made a satisfactory
calibration.
Service:
• Check the 0% switch setting
• Checkgearmotor wiring
• Check correct voltages and frequency settings
Page 99 of 209
Cybex 625T Treadmill Part Number

CYBEX 625T Specifications

General

User Weight Capacity	400 lbs
Speed Range	0.5 - 12.4 mph
Incline Range	0% to 15%
Display	LED
Heart Rate Monitoring	Contact and wireless
Running Area	60" x 20" (152 x 51 cm)