3.
Press the ENTER key to accept and begin editing the minutes.
4.
Press the UP and DOWN keys to select the minutes.
5.
Press the ENTER key to accept and begin editing the AM/PM/24 hour setting.
6.
Press the ENTER key to accept time.
Continue this procedure for the Date. Date format is [YYYY] [MM] [DD]. Y - Year, M - Month and D
- Day.
7.
Press the ENTER key after the final setting for Day. The opening screen will now be displayed.
Time and Date confirmation complete.
Setup options
1.
Press and the hold the Scan/Hold or Display option and UP keys for 3 seconds.
2.
Navigate through the setup menu with the UP and DOWN keys.
3.
Press the ENTER key once to enter setup values. Press again to save any changes and
advance forward in the menu.
Setup menu - LED console
Set time display format AM, PM, 12, or 24. Set time in Hours and Minutes HH:MM.Time
Date format is [YYYY] [MM] [DD]. Y - Year, M - Month, and D - Day.Date
LBS - Pounds, kg - Kilograms, or Stone - Stone.Weight Units
MI - Miles or kM - Kilometers.Distance Units
Set time length for Pause. OFF (Default), 1:00, 5:00 or 10:00 minutes.Pause
Set default workout time. 10, 20, 30 (Default), or 60.Default Time
Set maximum workout time. OFF (Unlimited), 30, 60 (Default), 90, or 120 minutes.Max Time
Set Quick Start mode. Choices are Arc (default resistance), CP - Constant Power
(default power), or AP - Adaptive Power (default level).
Quick Start
Mode
Toggle console beeper On (Default) or OFF.Beeper (Tone)
Set A/V option. Choices are none (Default), PEM, FM, UHF, or C.A.B. (Console
Adapter Box for Broadcast Vision). Contact qualified service technician for audio visual
setup.
A/V
Setup menu - E3 View Monitor
Set time display format AM, PM, 12, or 24. Set time in Hours and Minutes HH:MM.Time
Page 42 of 83
Cybex 626A/626AT, 627A/627AT Arc Trainer Part Number 5626-4 J
To Next Page
Loading...
Need help?
General
