9
C
B
A
a
b
CARRYING HANDLE ADJUSTMENT
WARNING! Always secure the baby with the
integrated harness system.
The carrying handle can be adjusted into three different
positions:
A: Carrying/Driving-Position.
B: For placing the baby in the seat.
C: Safe sitting position outside the car.
NOTE! When using ATON 2 in combination with ATON
changes from A to B.
WARNING! In order to avoid unwanted tilting of the
seat whilst carrying, make sure that the handle is
locked in the carrying position A.
• In order to adjust the handle press buttons
b on left
and right side on the handle
a.
• Adjust the carrying handle a to the desired position by
pressing the buttons b.
To Next Page
Loading...
