CYBEX ATON 2 User Guide


PRODUCT CARE
In order to guarantee the best possible protection for your
child, please take note of the following:
• All important parts of the child seat should be
examined for damages on a regular basis.
• 
It is essential that the child seat does not get jammed
between hard parts like the door of the car, seat rail etc.
which might cause damage to the seat.
• The child seat must be examined by the
manufacturer after e.g. having been dropped or
similar situations.
NOTE! When you buy a CYBEX ATON 2 it is
recommended to buy a second seat cover. This allows
you to clean and dry one whilst using the other one in the
seat.
IN CASE OF AN ACCIDENT
In an accident the seat can sustain damages which
are invisible to the eye. Therefore the seat should be
replaced immediately in such cases. If in doubt please
contact your retailer or the manufacturer.

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)