CYBEX ATON 2 User Guide


• Lift up the linear-side.impact protection (
LSP) device
to improve side protection during a side collision.
NOTE: It is not allowed to lift up the side protector (LSP)
on the side turned away from the vehicle door.
• Listen for an audible CLICK, when it locks
NOTE: When using the ATON 2 on a middle position in
the vehicle, it’s prohibited to fold out the (LSP) device.
WARNING! Using the (LSP) device to carry or to
fasten the ATON 2 is prohibited.
NOTE! When using ATON 2 in combination with ATON

changes from A to B.
REMOVING THE CAR SEAT
By pressing the locking devices f, you can fold the (LSP)
devices downwards into the original position.
NOTE: Before removing the ATON 2 from the vehicle,
fold the (LSP) devices back into place. This protects the
(LSP) device and the vehicle itself from damage.
• Take the seat belt out of the blue belt slot n in the
back.
• Open the car buckle q and take the lap belt k out of
the blue belt slots m.
A
B
LSP
LSP
f
LSP

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)