CYBEX ATON 2 User Guide

27
• that the car buckle
q is not reaching all the way to the
blue belt slot m
• that the car belt is tight and not twisted
• that the ATON 2 is vertically installed on the car seat
(see marking)
NOTE! The CYBEX ATON 2 is exclusively made for


• Lift up the linear-side.impact protection (LSP) device
to improve side protection during a side collision.
REMOVING THE INSERT
The insert, which is preinstalled when purchased, helps

In order to remove the insert please loosen the cover in
the baby seat, lift the insert a little bit and take it out of
the seat.

provide more space.
The adjustable insert x
enhances the comfort of the child up to approx.
9 months. Later the insert can be removed to give the
child additional space.
q
m

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)