CYBEX ATON 2 User Guide


REMOVING THE COVER
The cover consists of 5 parts. 1 seat cover, 1 adjustable
insert, 2 shoulder pads and 1 buckle pad. To remove the
cover please follow these steps:
• Open the buckle
e.
• Remove the shoulder pads d from shoulder belts c.
• Pull the cover over the seat rim.
• Pull the shoulder belts c with the buckle tongues t out
of the cover parts.
• Pull the buckle e through the seat cover.
• Now you can remove the cover parts.
WARNING! The child seat must never be used
without the cover.
NOTE! Use CYBEX ATON 2 covers only!
ATTACHING THE SEAT COVERS
In order to put the covers back onto the seat, proceed in
the reverse order as shown above.
NOTE! Do not twist the shoulder straps.
x

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)