CYBEX ATON 2 - Securing the Baby

15
e
h
d
g
e
t
c
CLICK
SECURING THE BABY
NOTE! Please remove all toys and other hard objects
from the car seat.
• Open the buckle e.
• To loosen pull up the shoulder belts c while pushing
the central adjuster button g and pulling the
shoulder belts c up. Please always pull the belt
tongues t and not the belt pads d.
• Place your baby into the seat.
• Put the shoulder belts c straight over the baby‘s
shoulders.
NOTE! Make sure that the shoulder belts c are not
twisted.
• Join the buckle tongue sections t together and
insert them into the buckle e with an audible CLICK.
Pull the central adjuster belt h until the shoulder belts

• Push the red button to open the buckle e.
NOTE!
the baby and the shoulder belts.