CYBEX ATON 2 User Guide

21
• Insert the lap belt
k into the blue belt guides m on
both sides of the car seat.
• Pull the diagonal belt l in driving direction to tighten
the lap belt k.
• Pull the diagonal belt l behind the top end of the baby
seat.
NOTE! Do not twist the car belt.
• Bring the diagonal belt l into the blue belt slot n on
the back.
• Tighten the diagonal belt l.
WARNING! In some cases the buckle
q of the car
safety belt may be too long and reach into the belt

install the ATON 2 securely. If this is the case please
choose another position in the car.
m
k
l
q
n

CYBEX ATON 2 Specifications

General

Height Capacity	Up to 32 inches
Base Included	Yes
Side Impact Protection	Yes
Recline Positions	Multiple
Harness Type	5-point harness
Removable Cover	Yes, machine washable
Weight Capacity	4-35 lbs
Installation Type	LATCH, Seat Belt
Safety Standards	FMVSS 213
Installation	LATCH system or seat belt
Base Compatibility	Compatible with CYBEX Aton Base 2
Stroller Compatibility	Compatible with CYBEX strollers
Additional Features	Linear Side-impact Protection (L.S.P. System)