1- Safety
IMPORTANT: Read all instructions and warnings before using the treadmill.
Important Voltage Information
Before plugging the power cord into an electrical outlet, verify that the voltage requirements for
your area match the voltage of the treadmill that you have received. The power requirements for
the TROTTER Elite treadmill include a grounded, dedicated circuit, rated for one of the following:
115 VAC ±5%, 60 Hz and 20 amps; 208/220 VAC, 60 Hz, 15 amps or 230 VAC ±5%, 50 Hz and
15 amps. See the serial number decal for the exact voltage requirements of your treadmill.
! WARNING: Do not attempt to use this unit with a voltage adapter.
Do not attempt to use this unit with an extension cord.
Grounding Instructions
This treadmill must be grounded. If it should malfunction or break down, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock. This product is
equipped with a cord having an equipment-grounding conductor and a grounding plug. The
plug must be plugged into an appropriate outlet that is properly installed and grounded in
accordance with all local codes and ordinances.
! DANGER:
Improper connection of the equipment-
grounding conductor can result in a risk of
electric shock. Check with a qualified
electrician or service provider if you are in
doubt as to whether the treadmill is properly
grounded. Seek a qualified electrician to
perform any modifications to the cord or
plug. Cybex is not responsible for injuries or
damages as a result of cord or plug
modification.
This treadmill is for use on a nominal 115 VAC
±5%, 60 Hz and 20 amps, 208/220 VAC, 60 Hz,
15 amps or 230 VAC ±5%, 50 Hz and 15 amps
and a grounded, dedicated circuit. Make sure
that the treadmill is connected to an outlet
having the same configuration as the plug. Do
not use a ground plug adapter to adapt the
power cord to a non-grounded outlet.
Cybex TROTTER Elite Treadmill Owner’s & Service Manual
115V Euro Plug 208/220V
NEMA 5-20 CEE 7/7 NEMA 6-15
Safety
Page 1-1