.
11
.
3
1
4
7
1
2
6
5
Left combination switch
The main functions of the left combination switch are as
follows:
Name Direction for Use
1.Dimmer switch
When the lighting switch button is pressed
to the position
"
"
, the high beam lamp
is turned on. When the lighting switch
button is pressed to the
"
"
position, the
low beam lamp is turned on.
2. O v e r taking
light switch
When the moto rc ycle needs to
overtake, press this
"
"
switch to
prompt the front vehicle.
3.Turn signal
switch
When the turn signal button is set to
the
"
"
position, the left turn signal
circuit is turned on. When the turn
signal button is set to the
"
"
position,
the right turn signal circuit is turned on.
4. Horn button
Press and hold this button
"
"
when
the vehicle needs to sound.
5. Emergency
switch
When this button is pressed, the hazard
warning lamp will be turned on, and the
left and right turn signals flash at the
same time. When the button is pressed
again, the hazard warning lamp will be
turned off.
6. MODE key
For the operation mode, please refer to
the Operation Manual of Sequron SR
600GY (RX600) TFT Instrument
7. SET key
For the operation mode, please refer to
the Operation Manual of Sequron SR
600GY (RX600) TFT Instrument
USER’S NOTICE
To Next Page
Loading...