.
26
.
2
1
Driving operation
OPERATION GUIDE
1. After starting preheating, retract the side support,
hold the clutch handle (Figure 1) and disengage the
clutch.Press the shift arm with the left toe (Figure 2)
(Note: the brake is in braking state before starting and
engaging gear), and shift the gear to the first gear.
2. Release the front brake handle or rear brake pedal, slowly
rotate the accelerator handle to accelerate, so as to start
the motorcycle. After the driving is smooth, then gradually
shift from low gear to high gear.
1.Please wear protective equipment (e.g. helmet,
protective gloves, protective glasses, protective clothing,
etc.) before driving.
2. It is forbidden to increase the throttle when starting
the motorcycle.
DANGER
To Next Page