.
15
.
4
3
Control part
1. This model is a wet multi plate clutch. When starting,
the gear must be shifted to neutral position.
2. In case of slipping or incomplete separation of
the clutch, please go to a professional motorcycle
maintenance shop or the company 's special
maintenance service center for repair.
Name
Instruction
3.Clutch
handle
It mainly controls the disengagement and
engagement of the clutch. Its free stroke is:
4.Gear change
pedal
This mot o r c y cle adopts a s i x-
speed tran smissi o n m ode w i th
constant engagement and two-stage
transmission.
Please reduce the accelerator and
use it together with the clutch when
shifting gears. The shifting way is
shown in the left figure.
The clutch of this model adopts manual wet multi plate.
When shifting gears, if the engine stalls, idles, the clutch
slips and is not completely separated, it will lead to
acceleration. At this time, the clutch needs to be adjusted;
Fine adjustment can be made through the adjusting screw
at the clutch handle, or at the clutch support of the engine
block.
ADVICE
USER’S NOTICE
To Next Page
Loading...