Need help?Do you have a question about the Cyfral CC4000 and is the answer not in the manual?
Configuration settings for the PC-4000 panel, including operation mode and device settings.
Settings related to the control electronics, such as ringing time, volume, and ringtone type.
Program for editing the subscriber table, adding, deleting, and initializing subscriber entries.
Functions for managing subscriber entry codes, including adding, deleting, and changing codes.
Program for managing electronic keys stored in the control panel memory.
Procedure for establishing a connection to a property by dialing the property number.
How to use pre-set codes to enter the staircase without a key.
Function activated from the master panel for temporary, automatic staircase access.
Automatic door opening mode activated by the system administrator for specific subscribers.
Diagram illustrating the connection of the CC4000 system in its basic video configuration.
Diagram showing the connection of the CC4000 system in its basic audio configuration.
Diagram and explanation for connecting multiple panels in a multi-input system.
Procedure to recover the installer passcode if it is lost or unknown.
Assigning and using an RFID proximity key to simplify panel installation and programming.
Enables one-person operation of the intercom system during installation.
Utilizing a subprogram to find uniphones causing short circuits on the system bus.
Explanation of the three addressing methods between the call panel and control electronics.
A comprehensive list of error codes and their potential causes for system troubleshooting.
Using the RS-485 monitor for start-up, diagnostics, and viewing system commands.
General| Brand | Cyfral |
|---|---|
| Model | CC4000 |
| Category | Intercom System |
| Language | English |
To Next Page