© 2021 Cypress Solutions Manual: CTM-ONE (Revision 1.0)
The CTM-ONE supports both Medium and High speed CAN interfaces as well as Single Wire CAN.
OBDII J1939
5.4 Power (Not required if OBDII/J1939 connected)
Molex Micro-Fit 3.0™ connector #:
Crimp Terminals 20-24 AWG
When a compatible vehicle interface is not available or not preferred the CTM can be connected with a DC
power cable for direct connection to a DC power supply or with an optional AC Wall Plug adaptor that allows
quick and easy connection to standard 120V AC Power.
To Next Page
Loading...