© 2021 Cypress Solutions Manual: CTM-ONE (Revision 1.0)
6. Accessing the CTM-ONE
The CTM-ONE will be ready for access and configuration 15-20 seconds after applying power.
6.1 Wi-Fi Access
By default, the CTM-ONE will broadcast its SSID when powered on. Scan for the SSID and connect after entering
the pre-shared key.
Depending on configuration some units will ship with customer defined SSID and PSK. Default SSID is
CypressCTM and the default password is CypressAccess.
CTM-ONE Web interface is accessible by opening a browser to http://192.168.2.1
6.2 LAN0 Access
When physically connected using an Ethernet cable the CTM-ONE Web interface is accessible by opening a
browser to http://192.168.1.1
6.3 RS232 Serial Access
When physically connected using a serial cable the CTM-ONE console can be accessed using a terminal
application (e.g. Hyperterminal). The default serial port settings are:
Baudrate: 115200
Data bits: 8
Stop bits: 1
Parity: No
6.4 Login
After successfully establishing a WiFi connection or wired connection you will be prompted for a user/password
To Next Page
Loading...