Cypress CTM-ONE - LED Indicators

© 2021 Cypress Solutions Manual: CTM-ONE (Revision 1.0)
25
Additional Features
Power
Consumption
mW(@12V)
Typical time
Standby Mode
1.2-40 mW
Variable based on duty cycle.
Operating System
Mode
300-400
mW
15-60 seconds/session based on data processing/sensing. For
Mobile applications device will be typically operate continuously in this
mode while the vehicle is in operation.
Transmit
1200 mW
1-3 seconds/session
7.3 LED Indicators
There are seven 5 indicators on the CTM-ONE.
LED
Description
Solid
Blinking
Off
Power
Power status
Full operating mode running of
DC input
Standby
Device has no
power
SIM
SIM Status
Green, using SIM1
Red, using SIM2
No SIM installed
Cellular
connectivity
disabled
Cellular
Indicates the type of
wireless data connection
Green, Good Signal
Red, Not connected, good
signal
Green, Poor Signal
Red, Not Connected,
Poor Signal
Cellular
connectivity
disabled
Wi-Fi
Wi-Fi. Indicator switches
between AP and Client for
simultaneous AP client
operation
Green, Access Point (AP) On
Red, Client Connected
Enabled, Not connected
Wi-Fi disabled
GNSS
Status of the GNSS module
Green, GNSS module has a
valid position fix
Red, Dead Reckoning mode
GNSS module does not
have a valid position fix
GNSS disabled