CY8CKIT-059 PSoCĀ® 5LP Prototyping Kit Guide, Doc. #: 001-96498 Rev. *G 33
Code Examples
7. PSoC Creator opens the programming window if the device is not yet acquired. Select KitProg
and click the Port Acquire button, as shown in Figure 5-4.
Figure 5-4. Port Acquire
8. After the device is acquired, it is shown in a tree structure below the KitProg. Click the Connect
button and then OK to exit the window and start programming, as shown in Figure 5-5.
Figure 5-5. Connect Device From PSoC Creator and Program
To Next Page
Loading...
