Cyrus Power - Guarantee; Warranty Terms and Claims

SPECIFICATIONS Cyrus Power Amplifier
English
18
Input Sensitivity (50W/8Ω) RCA ....................... 381mV
BAL ....................... 775mV
Input Impedance RCA .......................... 10kΩ
BAL .......................... 22kΩ
Slew Rate (i/p filter bypassed) ..............................700v/µS
Channel balance ...................................0.1dB
Frequency Response (-3dB)............ 1Hz-100kHz
Signal to Noise Ratio (Unwtd)................... 100dB
(Ref 50W) (A-wtd).................... 110dB
Signal to Noise Ratio (Unwtd)......................83dB
(Ref 1W) (A-wtd).......................94dB
Output Power (Internal PSU) 8 Ohms....................... 50W
(Stereo)
Output Power (PSX-R) 8 Ohms....................... 57W
(Stereo)
Output Power (Mbloc) 8 Ohms..................... 110W
THD+N (@ 2/3 full power.) (20Hz - 20KHz) .......0.01%
1kHz.......................0.004%
Voltage
See the plate attached to the rear of unit
Power Consumption
Standby..................................................................... (12W)
ON (No Signal) ........................................................ (23W)
ON (2 x 50W/Ch)................................................... (185W)
Safety Requirements ........................................... EN60065
Dimensions (WxHxD) ........................ 365 x 215 x 75 mm
Weight .......................................................................4.3Kg
Material ...................................................Magnesium alloy
and Aluminium alloy
The company reserves the right to change this specification without prior notice.
AUDIO PERFORMANCE
POWER SUPPLY
ENCLOSURE
Part No. PA-MANUL/Iss.03-9710 File:7MEN7A08.WIM