30D-Link DAP-1610 User Manual
Section 3 - Conguration
Wireless - Smart Connect Disabled (Continued)
5 GHz Extended Wi-Fi
Status Enable or disable the 5 GHz network by toggling this slider.
Wi-Fi Name (SSID) This is the name of the DAP-1610’s extended network. If
using Wi-Fi, the DAP-1610 will rebroadcast the uplink router’s
Internet connection under this SSID. You may also manually
set the SSID of the extended network.
Password Enter the password or network key that you wish to use for
the extended 5 GHz network.
Security Mode
Choose None, WPA3-Personal, WPA2/WPA3-Personal, WPA2-
Personal or WPA/WPA2-Personal.
802.11 Mode Select the desired wireless networking standards to use. The
available options for the 5 GHz wireless network are Mixed
802.11a/n/ac, Mixed 802.11a/n, 802.11ac only, 802.11 only,
802.11n only.
Schedule Use the drop-down menu to select the time schedule that the
rule will be enabled for. The schedule may be set to Always
Enable (default) or a custom can be created by clicking the
+ button then selecting “add” and specifying the times the
radio will be active.
To Next Page
Loading...
