D-Link AC1750 - Network Filters

81D-Link DIR-868L User Manual
Section 3 - Conguration
Network Filters
Select Turn MAC Filtering O, Allow MAC addresses
listed below, or Deny MAC addresses listed below
from the drop-down menu.
Enter the MAC address you would like to lter.
To nd the MAC address on a computer, please refer
to the Networking Basics section in this manual.
Select a DHCP client from the drop-down menu and
click << to copy that MAC Address.
Select a pre-dened or user created schedule from
the drop-down menu, or click New Schedule to
create a new schedule. You set a specic time frame
for the MAC lter rule to be active.
Congure MAC
Filtering:
MAC Address:
DHCP Client List:
Schedule:
Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MAC addresses from
accessing the network. You can either manually add a MAC address or select the MAC address from the list of clients that are
currently connected to the Broadband Router.