DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Installation and Connection
Configuring Wi-Fi Adapter in OS Windows XP
1. Click the Start button and proceed to the Control Panel > Network and Internet
Connections > Network Connections window.
2. Select the icon of the wireless network connection and make sure that your Wi-Fi adapter is
on.
Figure 11. The Network Connections window.
3. Search for available wireless networks.
4. In the opened Wireless Network Connection window, select the wireless network DAP-
1150 and click the Connect button.
After that the Wireless Network Connection Status window appears.
!
If you perform initial configuration of the access point via Wi-Fi connection, note that
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Page 22 of 175
To Next Page
Loading...
