DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Router Mode)
Additional Settings
On the Wi-Fi / Additional settings page, you can define additional parameters for the WLAN of
the access point.
!
Changing parameters presented on this page may negatively affect your WLAN!
Figure 124. Additional settings of the WLAN.
The following fields are available on the page:
Parameter Description
Station Keep Alive
The time interval (in seconds) between keep alive checks of wireless
devices from your WLAN. When the value 0 is specified, the
checking is disabled.
Beacon Period
The time interval (in milliseconds) between packets sent to
synchronize the wireless network.
RTS Threshold
The minimum size (in bites) of a packet for which an RTS frame is
transmitted.
Frag Threshold
The maximum size (in bites) of a non-fragmented packet. Larger
packets are fragmented (divided).
DTIM Period
The time period (in seconds) between sending a DTIM (a message
notifying on broadcast or multicast transmission) and data
transmission.
TX Power The transmit power (in percentage terms) of the access point.
Page 140 of 175
To Next Page
Loading...
