DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Access Point Mode)
CHAPTER 4. CONFIGURING DEVICE (ACCESS POINT
MODE)
Setup Wizard
Wi-Fi Setup Wizard
To specify all needed settings for your wireless network, click the Configure Wi-Fi button.
Figure 24. Common and advanced settings of the wireless LAN.
On the opened page, in the Common settings section, select the Enable Wireless checkbox (if
it was deselected before) to enable Wi-Fi connections.
In the Advanced settings section, you can split your network into several parts. To do this, select
the relevant value (2, 3, or 4) from the MBSSID drop-down list.
Click the Next button to continue.
Page 31 of 175
To Next Page
Loading...
