DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Configuring Device (Access Point Mode)
In the Basic settings section, you can change the basic parameters of your access point's WLAN:
“hide” your wireless network (Hide Access Point), specify a name for the network (SSID),
select your location (Country) and the wireless channel number (Channel), specify the operating
mode (Wireless Mode) and the maximum number of devices connected to the wireless network
(Max Associated Clients).
Figure 25. Basic settings of the wireless LAN.
Click the Next button to continue.
On the next page, you can modify security settings of the WLAN. By default, the Open network
authentication type with no encryption is specified for the WLAN.
Figure 26. The default security settings.
!
The default security settings do not provide sufficient protection for the WLAN. Please,
specify your own security settings for the WLAN (or each part of the WLAN if the
network was splitted into parts).
Page 32 of 175
To Next Page
Loading...
