DAP-1150 Wireless Access Point Supporting Router Mode
User Manual
Installation and Connection
6. In the opened window, in the list of available wireless networks, select the wireless network
DAP-1150 and click the Connect button.
Figure 14. The list of available networks.
7. Wait for about 20-30 seconds. After the connection is established, the network icon will be
displayed as the signal level scale.
!
If you perform initial configuration of the access point via Wi-Fi connection, note that
immediately after changing the wireless default settings of the access point you will need
to reconfigure the wireless connection using the newly specified settings.
Page 24 of 175
To Next Page
Loading...
