DAP-1325 Quick Installation Guide
Wi-Fi Client
This configuration step is available for the Repeater and Client modes.
1. On the Wi-Fi client page, in the Wireless Networks section, select the
network to which you want to connect. When you select a network, the
Network name (SSID) and BSSID fields are filled in automatically.
If you cannot find the needed network in the list, click the Update list button.
2. If a password is needed to connect to the selected network, fill in the
relevant field.
If you connect to a hidden network, from the Connecting to network list
select the Connect to hidden network value. Enter the network name to
the Network name (SSID) field. Then select a needed value from the
Network authentication list and then, if needed, enter the password in the
relevant field.
3. Click the NEXT button.
21
To Next Page
Loading...
Need help?
General
