DAP-1325 Quick Installation Guide
Selecting Operation Mode
In order to connect your device to a wired router for adding a wireless network
to the existing local network, on the Device mode page, from the
Connection method list, select the Wired connection value. In this mode
you can change the LAN IP address, set your own settings for the wireless
network and set your own password for access to the web-based interface of
the device.
In order to connect your device to a wireless router for extending the range of
the existing wireless network, on the Device mode page, from the
Connection method list, select the Wi-Fi value. Then from the Work
mode list select the Repeater value. In this mode you can change the LAN
IP address, connect your device to another access point, set your own settings
for the wireless network, and set your own password for access to the web-
based interface of the device.
18
To Next Page
Loading...
Need help?
General
