D-Link DAP-1720

41D-Link DAP-1720 User Manual
Section 3 - Conguration
Click the Save button to save the system settings to a le
to the local hard drive. You will then see a le dialog where
you can select a location and enter a file name for the
conguration le.
Click the Load button to load the system settings from a
previously saved le on the local hard drive.
Click the Restore button to restore the system settings to
factory default settings. This will erase all currently stored
settings.
Click Reboot to reboot the DAP-1720.
Save Settings
To Local Hard
Drive:
Load Settings
From Local
Hard Drive:
Restore
to Factory
Default
Settings:
Reboot the
Device:
System
This page allows you to save or restore your system conguration, reset, or reboot the DAP-1720. To access this page, click the
Management drop down menu at the top of the page, and select System. Click Save at any time to save the changes you have
made on this page.