D-Link DGS-1024D G2 - Hardware Installation; Step 1 - Before Connecting to the Network

13D-Link DGS-1016D/DGS-1024D User Manual
Section 3 - Hardware Installation
Hardware Installation
This chapter provides unpacking and installation information for the D-Link DGS-1016D/DGS-1024D Gigabit Ethernet Switch.
Step 1 - Before Connecting to the Network
The site where the switch is installed may greatly aect its performance. For the switch to perform safely at its optimal level,
please select a site which meets the following requirements:
1. Install the DGS-1016D / DGS-1024D in a fairly cool and dry place. See Technical Specications page in the manual for the
acceptable operation temperature and humidity ranges.
2. Install the switch in a site free from strong electromagnetic eld generators (such as motors), vibration, dust, and direct
exposure to sunlight.
3. Leave at least 10cm of space around the switch for ventilation.
4. Place the switch within 1.82 meters (6 feet) of a power outlet.