4D-Link DGS-1016D/DGS-1024D User Manual
Section 1 - Product Overview
Features
The DGS-1016D and DGS-1024D switches are designed for easy installation, exibility, and high performance. They do not
require any management. Connect devices to the switch as the scale and volume of network trac increases.
• 10/100/1000 Base-T on all ports
• Store and Forward Switching Method
• Cable Diagnostics at boot
• D-Link Green Technology
• Auto MDI/MDIX
• Auto Negotiation of Duplex Mode
• Full/Half Duplex Transfer Mode on 10/100 Mbps
• Full Duplex Transfer Mode on 1000 Mbps
• Wire-Speed reception and transmission
• 8K absolute MAC Address
• 512 KB RAM for data buering
• Easy to read diagnostic LEDs
• IEEE 802.3x Flow Control for Full-duplex mode
• Back Pressure Flow Control for Half-duplex mode
• IEEE 802.1p QoS (support 4 Queues, Strict Mode)
• Jumbo Frame support (9216 Bytes)
• IEEE802.3az EEE
To Next Page
