EasyManua.ls Logo

D-Link DGS-3100-48 - Configuring Trust Host

D-Link DGS-3100-48
293 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
DGS-3100 Series Gigabit Stackable Managed Switch User Manual
130
Configuring Trust Host
The Trusted Host Page enables network managers to apply restrictions on managing the device from remote stations.
Network managers can configure up to 30 remote stations. Only those stations that are included in this list may manage the
device. Ensure that the IP address from which the device is currently being configured is included to prevent disconnection.
To enable Trust Host:
1. Click Security > Trusted Host. The Trusted Host Page opens:
Figure 5-2.Trusted Host Page
The Trusted Host Page contains the following fields:
Field Description
IP Address (1-30)
Defines the management station IP address from which the device can be managed.
Network Mask (1-30)
Defines the management station IP Subnet Mask from which the device can be managed.
Telnet
If selected, permits Telnet access to be used for management access to the device.
SNMP
If selected, permits SNMP access to be used for management access to the device.
HTTP
If selected, permits HTTP access to be used for management access to the device.
HTTPS
If selected, permits HTTPS (Secure HTTP) access to be used for management access to the
device.
SSH
If selected, permits SSH (Secure Telnet) access to be used for management access to the
device.
Ping
If selected, permits the host to ping the device.

Table of Contents

Related product manuals