DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Field Description
Unit
Displays the stacking member for which the firmware image information is displayed.
Image
oftware Each device has two image files, one for reboot and one for backup. Upon s
upgrade download, the downloaded image file is designated for reboot, although users
can modify this in the Config Firmware Image page.
An “*” indicates that this image file is used for reboot.
Version
Displays the image file’s version number.
Update Time
are was saved to the server. Displays the time and date which the softw
Set Boot
Selects the image to be become the active image at the next bootup.
Delete
Deletes the selected image. The image is deleted immediately.
Config Firmware Image
nge each device’s image file. To change the reboot file:
Image Page
The Config Firmware Image Page allows users to cha
1. Click Configuration > Dual Image Services > Config Firmware Image. The Config Firmware
opens:
Figure 0-22. Config Firmware Image Page
The Config Firmware Image Page contains the following fields:
Field Description
Unit
Defines the stacking member for which the reboot image file is defined.
Image
file.
Defines the image file used for reboot. The possible values are:
• 1 – Image-1 is the latest downloaded image file.
• 2 – Image-2 is the previously downloaded image
2. Select the Unit and choose its reboot Image file.
3. Click
. The device will use the defined image file to reboot next time.
60
To Next Page
Loading...
