DGS-3100 Series Gigabit Stackable Managed Switch User Manual
Using the Tool Menu
The tool menu contains menu options for:
• Displaying the Stack Status
• Locating Devices
• Backing up and Restoring Configuration Files
• Resetting the Device
• Downloading the Firmware
• Rebooting the System
Displaying the Stack Status
The Stacking Information Page provides specific information for stacked devices. For more information regarding the
stacking setup, see Managing Stacking section.
Locating Devices
The Device Locator Page enables locating system devices by activating LED locators. To locate devices:
1. Click
> Device Locator. The Device Locator Page opens.
Figure 0-2. Device Locator Page
2. Click
. The LED locator is activated for 20 seconds On which the letter “L” will flash on
the master unit.
7
To Next Page
Loading...
