DGS-3100 Series Gigabit Stackable Managed Switch User Manual
92
Configuring QoS Scheduling Mechanism
The QoS Scheduling Mechanism Page contains fields for defining the QoS scheduling forwarding scheme. To define the
QoS scheduling mechanism:
1. Click QoS > QoS Scheduling Mechanism. The QoS Scheduling Mechanism Page opens:
Figure 4-6. QoS Scheduling Mechanism Page
The
QoS Scheduling Mechanism Page contains the following fields:
Field Description
Class ID
Indicates the Class/queue for which the scheduling method is defined.
Mechanism
Defines the QoS class/queue scheduling method. The possible field values are:
Strict — Specifies whether traffic scheduling is based strictly on the queue priority. Traffic
with the highest Class of Service is the first traffic. That is, the highest class of service will
finish before other queues empty.
Round Robin — Assigns WRR weights to queues. This field is enabled only for queues in
WRR queue mode. If a queue is set to 0 weight, the queue is not operational and is
effectively closed. Each queue has a weight range, queues 0-3 have the range 0-15
When mixing Strict and WRR mode, Strict mode should be configured at higher
class.(Class 3 and Class 2)
Weight
Assigns the specific WRR value to the Queue. The weight value range is 0-15.
2. Select the Class IDs in the Mechanism field.
3. Click
. The QoS Scheduling Mechanism is configured, and the device is updated.
To Next Page
Loading...
