DGS-3100 Series Gigabit Stackable Managed Switch User Manual
64
The
GVRP Setting Page contains the following fields:
Field Description
Defines whether GRVP is enabled on the device. The possible field values are:
GRVP Global Setting
Enabled — Enables GRVP on the device.
Disabled — Disables GRVP on the device. This is the default value.
Unit
Defines the stacking member’s Unit ID and LAGs for which GVRP parameters are displayed.
From Port
Defines the first port number that is displayed to which GVRP are assigned.
To Port
Defines the last port number that is displayed to which GVRP are assigned.
PVID
Defines the PVID assigned to the port.
GVRP
Defines whether GVRP is enabled on the port. The possible field values are:
Enabled — Enables GVRP on the selected port.
Disabled — Disables GVRP on the selected port. (This is the default value).
Ingress
Defines whether Ingress filtering is enabled on the device. The possible field values are:
Enabled — Enables Ingress filtering on the device. Ingress filtering compares an incoming
VID tag packet with the PVID number assigned to the port. If the PVIDs vary, the port
drops the packet. (This is the default value).
Disabled — Disables Ingress filtering on the device.
Acceptable Frame
Type
Defines the packet type accepted on the port. The possible field values are:
Admit Tagged Only —Only tagged packets are accepted on the port.
Admit All — Both tagged and untagged packets are accepted on the port. (This is the
default value).
2. Select a stacking member in the Unit field.
3. Select the ports to and from which the GVRP parameters are displayed in the From/To Port fields.
4. Define the PVID, GVRP, Ingress, and Acceptable Frame Type fields.
5. Click
. The GVRP is enabled, and the device is updated.
To Next Page
Loading...
