17D-Link DHP-W306AV User Manual
Section 3 - Configuration
Member List:
Link Rate:
Status:
QoS Setting:
This section provides information on the Powerline
AV devices in your Powerline network, or any devices
that were previously connected but it are currently
disconnected.
Displays the device’s current data rate in Mbps.
This eld shows the status of the device. If the
eld displays the word , then the device
is connected to your Powerline network. If the eld
displays the word then the device has
been added to the network but it is not ready. Please
check its password and make sure the device is
powered on.
You can congure your Powerline AV devices to give
priority to powerline network trafc according to its
unique .
To Next Page
Loading...
