D-Link DHP-W312AV - Time

26D-Link DHP-W312AV User Manual
Section 3 - Conguration
Time
The Time Conguration option allows you to congure, update, and maintain the correct time on the internal system clock. From this section you
can set the time zone that you are in. Daylight Saving can also be congured to automatically adjust the time when needed.
Time Zone:
Daylight Saving:
Enable NTP Server:
NTP Server Used:
Date and Time:
Save Settings:
Select the Time Zone from the drop-down
menu.
To enable Daylight Saving time adjustment,
click the Enable Daylight Saving check box.
Next, use the drop-down menu to select
a Daylight Saving Oset and then enter
a start date and an end date for daylight
saving time.
NTP (Network Time Protocol) allows the
device to automatically set the system clock
based on an Internet NTP server. Check
this box to use a NTP server. This will only
connect to a server on the Internet, not a
local server.
Enter the NTP server or select one from the
drop-down menu.
To manually input the time, enter the values
in these elds for the Year, Month, Day,
Hour, Minute, and Second and then click
Save Settings. You can also click the Copy
Your Computer’s Time Settings button at
the bottom of the screen.
Click Save Settings to save and activate the
new changes.