D-Link DHP-W312AV - Firmware

28D-Link DHP-W312AV User Manual
Section 3 - Conguration
Firmware
You can upgrade the rmware of the DHP-W312AV from this page. Make sure the rmware you would like to use is on the local hard drive of your
computer. Click Choose File to locate the rmware le to be used for the update. Please check the D-Link support site for rmware updates at
http://support.dlink.com. You can download rmware upgrades to your hard drive from the D-Link support site.
This box displays your current rmware
information. Click the Check Now button
to check online for the latest rmware and
language pack. If a new version exists,
download the new rmware to your hard
drive.
After you have downloaded the new
rmware, click Choose File to locate the
rmware update on your hard drive. Click
Upload to complete the rmware upgrade.
You can change the interface language of
the device by uploading a language pack.
To install a language pack, click the Choose
File button to locate the D-Link language
pack upgrade file on your computer.
Once you have found the file, click the
Upload button to begin the language pack
upgrade process. This can take a minute or
more. Finally, wait for the device to reboot.
This process can take about 75 seconds.
Firmware and
Language Pack
Information:
Firmware Upgrade:
Language Pack
Upgrade: