15
In order to configure the DI-714 you must input the user-name into
the
User Name
box. Enter the password into the
Password
box and
press the OK button. The default User Name is “admin.” There is no
default password, leave the Password field blank.
Once you have logged-in as administrator, it is a good idea to change
the administrator password to ensure a secure connection to the DI-714.
The Advanced Settings section described later in this manual describes
how to change the password.
Once you have input the correct password and logged-in, the screen
will change to the Main Page screen.
If you are having problems logging in and you are sure that the
password you are using is correct, check the top right-hand corner of your
keyboard to make sure that the Caps Lock light is not on.
To Next Page
Loading...
Need help?
General
