6
Broadband Router to expose it to the Internet and ensure complete Internet
application compatibility even if specific ports are not known.
Unlike proxy server or NAT software that requires the software server
to remain visible on the Internet, local networked computers are not
directly externally visible when using the DI-714. Also the Wireless
Broadband Router, like broadband, is always on, removing the need to
constantly boot a software server when access is desired from a client.
Integrated DHCP services allow up to 253 users to get their IP address
automatically on boot up from the DI-714. Client machines require no
software (only the installed NIC card in a wireless network), simply set the
Ethernet or wireless adapters to accept a dynamically assigned IP address
and reboot. Each time they are powered up the DI-714 will recognize
them and set their IP address to instantly connect them to the LAN.
Package Contents
The D-Link DI-714 package should include the following items.
DI-714 Wireless Broadband router
User’s Manual
Quick Install Guide
Power Adapter
CAT-5 UTP Cable
To Next Page
Loading...
Need help?
General
