41
Troubleshooting
In the event that you are unable to connect to or use your DI-714
Wireless Broadband Router, please refer to the following troubleshooting
guide. After each problem description, a possible cause and problem
resolution is provided. If this section does not help you fix the problem, go
to the D-Link web site (www.dlink.com) for additional troubleshooting tips.
If neither of these helps, please contact D-Link Technical Support for
additional help. The phone numbers for Technical Support are in the
appendix of this manual under
D-Link Office Information
.
Basic Functions
My Broadband Router will not turn on. No LED’s light up.
Cause:
The power is not connected or the power switch is set to “Off”.
Resolution:
Connect the power adapter to your Broadband Router and plug it into
the power outlet.
Make sure that the power switch is set to “On”.
Note: Only use the power adapter provided with your Broadband Router.
Using any other adapter may damage your Broadband Router and violate
your warranty.
To Next Page
Loading...
Need help?
General
