DIR-300A Wireless N150 Router
User Manual
Configuring via Web-based Interface
Parameter Description
DNS Relay
Select the checkbox so that the devices connected to the router
obtain the address of the router as the DNS server address.
Deselect the checkbox so that the devices connected to the router
obtain the address transmitted by the ISP as the DNS server address.
Start IP
The start IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
End IP
The end IP address of the address pool used by the DHCP server to
distribute IP addresses to clients.
Lease time
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
External DHCP server IP
The IP address of the external DHCP server which assigns IP
addresses to the router's clients.
When all needed settings are configured, click the Apply button.
In the IPv6 address assignment section, you can enable the DHCPv6 server of the router and
select its operating mode.
Figure 93. The section for configuring the DHCPv6 server.
Parameter Description
Enable DHCPv6 Server
Select the checkbox to enable the DHCPv6 server of the router.
When the checkbox is selected, the Mode drop-down list and the
Leased Time field are displayed on the page.
DHCP PD
Select the checkbox to activate the Prefix Delegation function.
When the checkbox is selected, the router requests a prefix to
configure IPv6 addresses for clients of the LAN from a delegating
router.
Page 110 of 181
To Next Page
Loading...
